Ohio

Steel Warehouse of Ohio 
3193 Independence Road 
Cleveland, OH 44105 
Phone: 888-225-3760
Fax: 216-441-3103

Equipment ID Leveler Ohio Shear
SWCI ID LD W9
Gauge Minimum .125" .050"
Gauge Maximum .875" .375" (mild steel)
Entry Width Minimum 24" 4"
Entry Width Maximum 72" (M.E.) 144"
Entry I.D. Minimum 24"  
Entry I.D. Maximum 34"  
Entry O.D. Maximum 80"  
Entry Coil Wgt. Max. 80,000#  
Exit Width Minimum 24" 36" Back Gauge
Exit Width Maximum 72" (M.E.) 48"
Sheet Length Minimum 24" 6"
Sheet Length Maximum 480" (40 ft.) 240"
Stack Height Maximum 20"
Stack Weight Maximum 10,000#
Length Tolerance 32” - 144” (-0”/+ 1/16”)
145” – 300” (-0”/+ 1/8”)
300” – 720” (-0”/+ 1/4") 		+/- 1/64"
Squareness Tolerance 32” – 144” (1/16”)
145” – 300” (1/8”) 		1/32"
Camber 1/4" in 8ft
Flatness
  • 1/8” in 8 ft for mild steel (up to 60,000 KSI)
  • 5/16” in 8 ft for high strength steel (60,000 KSI up to 80,000)
  • 7/16” in 8 ft for HSLA (100,000 KSI)
Steel Grades 1006/130,000 KSI 1008/980
    Notes:
  1. Squareness is obtained by measuring the difference between the diagonals of the cut length. The deviation is one-half the difference. These tolerances are applicable only to slit-edge product.
  2. Flatness is measured as max deviation from a horizontal flat surface.
  3. Anything beyond the limits stated above, please inquire with Production Management.